YuChun
Email : info3@greentpu.com
Add:No. 11, Wentang North Road, Wenzhou Road, Dongcheng Dist., Dongguan, Guangdong, China
(Old address:No. 232, Wentang North Road, Wenzhou Road, Dongcheng Dist., Dongguan, Guangdong, China)
What factors will cause the performance of TPU hot melt adhesive film to decline?
TPU hot melt adhesive film is a high-performance adhesive that is widely used for bonding and sealing various materials. However, during use, some factors may cause its performance to degrade. This article will explore these factors to better understand how to improve the performance of TPU hot melt adhesive film.
1. Temperature and time
The performance of TPU hot melt adhesive film is closely related to the temperature and time it withstands. High temperatures and prolonged heat exposure may cause the adhesive film to gradually lose its properties, resulting in a decrease in bond strength. Therefore, during use, long-term high temperature exposure should be avoided as much as possible and the recommendations in the product manual should be followed to ensure the best use effect.
2. Humidity
Humidity is also an important factor affecting the performance of TPU hot melt adhesive film. If the humidity in the environment is too high, the adhesive film may absorb moisture and expand, thus affecting its bonding performance. In addition, if the surface of the bonded material contains moisture, it may also affect the bonding effect of the adhesive film. Therefore, before use, the bonded materials should be dried and the relative humidity of the use environment should be below 50%.
3. Ultraviolet irradiation
Ultraviolet irradiation is another important factor that causes the performance of TPU hot melt adhesive film to decline. Long-term exposure to UV radiation may cause the film to gradually degrade, thereby reducing its bonding performance. Therefore, during use, ultraviolet exposure should be avoided as much as possible, and the lighting conditions of the use environment should meet the requirements.
4. Contact with chemical substances
Certain chemicals may react with the TPU hot melt adhesive film, causing its performance to degrade. For example, acidic and alkaline substances may gradually degrade the adhesive film, thereby reducing its bonding performance. Therefore, during use, you should try to avoid contact with these chemicals and follow the recommendations in the product instructions to ensure the best use results.
5. Mechanical stress
Mechanical stress is another factor that leads to the degradation of TPU hot melt adhesive film performance. During the bonding process, if excessive force or excessive compression of the material to be bonded may cause the adhesive film to be affected by mechanical stress and reduce its bonding performance. Therefore, during use, the recommendations of the product manual should be followed and the impact of mechanical stress should be minimized as much as possible.
To sum up, factors such as temperature and time, humidity, ultraviolet radiation, exposure to chemical substances, and mechanical stress may cause the performance of TPU hot melt adhesive films to decline. In order to improve its performance, the influence of these factors should be avoided as much as possible and the recommendations in the product manual should be followed.
YuChun
Email : info3@greentpu.com
Add:No. 11, Wentang North Road, Wenzhou Road, Dongcheng Dist., Dongguan, Guangdong, China
(Old address:No. 232, Wentang North Road, Wenzhou Road, Dongcheng Dist., Dongguan, Guangdong, China)
· Sample thickness, width to write clearly.
· Sample color and surface effect to be noted.
· Sample hardness and special requirements Please note.
Please contact: +86-13686006083(WeChat)
我司拥有多套完整的生产线;掌握自主研发的核心技术;通过了ISO9001:2015质量管理体系认证;是阿里巴巴深度验厂的厂家;TPU薄膜和TPU热熔胶膜产品通过了SGS测试,取得了测试报告。
Copyright © 2016-2017 东莞市特普优环保新材料有限公司 All rights reserved. 网站备案/许可证号:粤ICP备17107930号