Reasons for the opening of TPU hot melt adhesive film
The temperature is too high during operation.
Although the TPU hot melt adhesive film needs to be melted at a higher temperature, then the compounding process is completed. However, in the actual application process, we must also pay attention to temperature control to avoid excessive temperature, otherwise the film material will be easily degraded and lose its viscosity. TPU hot melt adhesive film is a kind of polymer compound. In the process of bonding with the material to be bonded, its essence is a kind of diffusion of its own macromolecules in the process of heating and movement, so that they dissolve each other, and finally make the glue move and the adherend molecules form a firm bond.
2023-02-15
Back List
Reasons for the opening of TPU hot melt adhesive film
The temperature is too high during operation.
Although the TPU hot melt adhesive film needs to be melted at a higher temperature, then the compounding process is completed. However, in the actual application process, we must also pay attention to temperature control to avoid excessive temperature, otherwise the film material will be easily degraded and lose its viscosity. TPU hot melt adhesive film is a kind of polymer compound. In the process of bonding with the material to be bonded, its essence is a kind of diffusion of its own macromolecules in the process of heating and movement, so that they dissolve each other, and finally make the glue move and the adherend molecules form a firm bond.
In the process of using TPU hot melt adhesive film for bonding, some people will have problems with poor bonding. For this kind of problem, many factors should be considered, such as the type of TPU hot melt adhesive film, the temperature during the lamination process is not up to standard or incompatible with the adhesive material. Therefore, when purchasing TPU hot melt adhesive film, it is necessary to learn more about the materials to be bonded and the performance of TPU hot melt adhesive film, so as to make the best fit effect more stable.
Although TPU hot melt adhesive film has a wide range of applications and a high penetration rate, it is beyond the reach of most people because it belongs to the field of industrial applications. So in the cognition of many people, they may not have the impression of it. What looks like plastic film is actually an adhesive that can be used in a variety of places!
From its characteristics, TPU hot melt adhesive film is actually an adhesive with certain toughness, but not hardness. The hardness of 502 glue is very strong, but it lacks toughness. Different functions also correspond to different usage scenarios, so the two are not interchangeable.
