Keywords:
Welcome!Dongguan Green TPU Co.
Ltd. TPU film
Hot melt film
TPU apron
Electroplating tpu film
Dongguan Green TPU Co.,Ltd.
15year TPU film/TPU hot melt adhesive film custom manufacturer
Service Hotline
13686006083
Welcome to us
TPU hot melt adhesive film is used for assault suit and Barbie library
​Nowadays, people's pursuit of beauty is getting higher and higher. When wearing close fitting clothes, there is no sign of wearing on the edge, which is the effect of no trace. For example, seamless underwear, seamless socks and Barbie pants. In the bonding of such high resilience fabrics and clothing, the edges are sealed with highly elastic TPU hot melt adhesive film, replacing the traditional sewing process, so that various types of seamless clothing have the characteristics of loose, wear without leaving traces, and high comfort, solving a major problem in the clothing industry. Now let's know that TPU hot-melt adhesive film is used for assault jackets and Barbie libraries
2022-11-22
Back List

TPU hot melt adhesive film is used for assault suit and Barbie library

    Nowadays, people's pursuit of beauty is getting higher and higher. When wearing close fitting clothes, there is no sign of wearing on the edge, which is the effect of no trace. For example, seamless underwear, seamless socks and Barbie pants. In the bonding of such high resilience fabrics and clothing, the edges are sealed with highly elastic TPU hot melt adhesive film, replacing the traditional sewing process, so that various types of seamless clothing have the characteristics of loose, wear without leaving traces, and high comfort, solving a major problem in the clothing industry. Now let's know that TPU hot melt adhesive film is used for assault jackets and Barbie libraries

    The fabric of the sweater is covered with a special film, which is waterproof and windproof, and is called pressing glue. The pressing glue can be divided into two layers and three layers. The two layers are the combination of waterproof layer and outer garment layer, and the lining is separated. The third layer is the combination of outer fabric, waterproof breathable film and lining.

    In the pocket, placket and brim of the jacket, the high elastic TPU hot melt adhesive film is used instead of the traditional sewing process to make it three-dimensional and beautiful. The use of waterproof strips at the seams can play an excellent waterproof effect. At the same time, the TPU hot melt adhesive film has excellent weather resistance and can withstand the bad weather outdoors.

    Barbie pants adopt the seamless fitting process, and the seamless splicing is not tight. Barbie pants are mainly made of high elastic fabric, so the adhesive film is required to have high elasticity. The elasticity of the hot melt adhesive mesh film is not enough, so the high elastic TPU hot melt adhesive film will be used as the adhesive.

    In response to the product demand of Barbie pants, GreenTPU TPU hot melt adhesive film introduces a high elastic TPU hot melt adhesive film, which is compounded with the hip lifting fabric of Barbie pants to replace the traditional elastic band. It has a soft feel and water washing resistance. It can be washed more than 20 times at 40 degrees!

b96ea64b9fd15e4584b7693d5ae9654.png

View Other
TPU hot melt adhesive film vs anaerobic adhesive: "Scene flexibility" difference in automotive interior bonding
2025-09-11
​From the perspective of curing conditions, TPU hot melt adhesive film does not need to rely on special environments, while anaerobic adhesives are severely restricted by "auerobicity". The curing principle of anaerobic glue is to undergo polymerization under conditions of lack of oxygen and catalyzed by metal ions (such as iron and copper). If it is in an environment where air circulation or metal substrates are not available, the curing speed will be greatly slowed down or even unable to cure. In automotive interiors, most bonding scenarios are "open" (such as bonding the door panel skin to PP substrate, and the ceiling fabric to the sponge), the air can freely contact the bonding surface, and the substrate is mostly non-metallic (PP, ABS, fabric, etc.), lacking metal ion catalysis, and additional catalyst is required when using anaerobic glue, and the curing time is as long as several hours, which is difficult to meet the needs of industrial production. The TPU hot melt adhesive film only needs to be melted by heating (120-160℃) and can be cured after pressurization and cooling. It does not need to rely on the ambient oxygen concentration or the base material. It can be cured stably in open or closed bonding scenarios, and the curing time only takes a few dozen seconds to a few minutes, adapting to the fast-paced needs of the interior production line.
MORE